No Products in the Cart
Single Replacement Filter for 64oz Filters pH2O Alkaline Water Pitcher:
✅ ENHANCES Alkaline pH of water UP TO 9.5 - By decreasing water micro clusters from 12 molecules down to 4-6, alkaline water is more quickly and easily absorbed. This increased hydration may help flush harmful toxins from your body more quickly. The result of this healthy mineralized water can result in: increased energy levels, improved heath, slowed aging process, and restored younger looking skin. Water remains alkaline for over 30 days.
Removes chlorine, chemicals, VOC's, PFOA's pesticides, heavy metals like lead, Copper, Zinc, Aluminum and Chromium 6, and Radon 222 nitrates. It also reduces 85% to 90% of fluoride and arsenic. This particular filter does not remove bacteria, virus & cysts due to the porosity. This filter is only designed to be used to filter tap water or chlorinated municipal water. This filter cannot filter out sea water (salt water). The filter has a filtering capacity of 100 gallons or 6 months.
Potential Health Benefits of Alkaline Water:
- Energizes and restores pH balance to the body.
- Provides detoxification, flushes toxins, reduces cellular and DNA damage caused by free radicals, prevents rapid aging.
- Enables hydration at the cellular level.
INSTRUCTIONS BEFORE USE: Each Filter MUST be flushed before use with the red flushing bulb. Simply screw the red flushing bulb onto the filter and hold under faucet then slowly turn on faucet until water starts to flush through the filter for a at least 3 minutes. Flush the filters in order to get any loose carbon dust rinsed off. This also activates the filters. You should also keep the flushing bulb for future use, if the flow rate slows way down, you can try flushing the filters again to speed up the flow rate. If this does not help then it is most likely time to replace the filters.
HOW OUR FILTERS WORK
The high-tech, porous, BPA-free, micro-filter is infused with both the finest-granulated activated coconut carbon exclusive adsorbing media. Our manufacturer, Seychelle Environmental Technologies created a uniform 2-micron absolute pore size for the assured reduction and removal of all five areas of contamination. Removal of contaminants with carbon is a surface phenomenon known as adsorption, resulting from the molecular attraction of substances to the surface of the carbon. The controlled 2-micron filter contains thousands of interconnected omni-directional pores that result in a "tortuous path" for superior analyte reduction. By forcing the source water through the filter, contaminants and pollutants are removed, while beneficial trace minerals remain. Seychelle's exclusive Ionic Adsorption Micro-Filtration coordinates all processes of contaminant reduction by adsorption, absorption, chemical bonding, chelation, and depth filtration. Each product is designed to guarantee the greatest amount of reduction per contaminant.
The micro-porous body of the filter spearheads the removal of what is referred to as the “A, B, C, D and R” of water contamination:
Aesthetic – unpleasant taste and odors, cloudiness, silt, sediment, chlorine, and chlorine byproducts.
Biological – harmful microscopic pathogens, including cryptosporidium, giardia, e-coli, and other cysts and spores.
Chemicals – toxic chemicals (VOCs), trihalomethanes, PCBs, PCEs, detergents, and pesticides.
Dissolved Solids – heavy metals including aluminum, fluoride, cadmium, chromium 6, copper, lead, arsenic, and mercury
Radiological – gross beta, radon 222, alpha radium 226, uranium, plutonium, cesium 134 and cesium 137.
I have the two filter model, and the filters are extremely slow sometimes, what is the problem?
The filters need to be flushed properly. If it doesn't fit well try using an outside spigot to flush them. You will need to have good pressure flushing the filters well. The media inside the filters need to be completely saturated before they will work correctly. Sometimes it takes a few times flushing and using to get them flowing correctly. You may have to flush them periodically sometimes but not all the time.
What is the Filtering Capacity: 100 gallons
How often do filters need replacing on average?
They need to be replaced every 4 to 6 months
Can the same filters for the 32oz also fit the small 64oz pitcher?
Yes, both pitcher interchangeably can use the same filters
Does this filter remove the sodium?
No, they do not remove sodium. PLEASE DO NOT USE IN SALT WATER OR OCEAN WATER
|Color:||Blue, Purple, White|