No Products in the Cart
Water Purifying Pump - Pocket Size - Pump 2 Pure Supreme Water Purifier
✅ PERFECT FOR HOME EMERGENCIES, BOIL WATER ADVISORIES, CAMPING, Whether at home or on the go, clean, safe drinking water is a MUST for everyone. Each Supreme portable water filter pump provides up to 100 gallons of clean, safe drinking water. Powered by Seychelle Water Filtration
✅ ALL FILTERS MADE IN USA - Place your trust in Premium Water Pitch Filters that are manufactured in an ISO 14000 certified facility. This facility has been routinely tested to meet highest quality standards for two decades.
Powered by Seychelle Water Filtration Proprietary Technology - Ionic-Adsorption Micro-Filtration. Reduces up to 99.9999% of waterborne contamination such as:
Key Features:
To set up Pocket Pump 2 Pure, unpack the items from the case.
Pocket Pump 2 Pure pump
Intake water hose
Clean water hose (stored inside intake water hose) with a gray
quick disconnect fitting on the end one pre-filter with a yellow cap.
Flush bulb
Spare polyurethane foam and o-rings.
The Supreme filter (installed in the pump)
Clean water hose clip*
*Use clean water hose clip to attach a clean water hose to the bucket, water
bottle, or any other device that it can latch onto to collect your clean
water. Not for use when filling hot water pots.
Assemble by following the steps below:
1. Unscrew large black filter cap next to the pump handle.
2. Remove the yellow sticker from the bottom of the Supreme Filter.
3. Replace the cap/filter.
4. Remove smaller clean water hose stored inside larger intake water hose.
5. Attach pre-filter to end of an intake water hose. (The hose should fit
securely onto pre-filter.)
6. Attach the opposite end of the intake water hose to the fitting located on side of
the pump handle. (The hose should fit securely onto the fitting.)
7. Locate a gray quick-release button on the clean water hose, depress the gray
button, and connect a hose to a black filter cap on top of the pump.
8. Avoid stripping fitting hosing and o-rings by depressing the gray quick
release button when connecting or disconnecting fittings.
Assembly is complete!
To use:
Submerge pre-filter under surface water and pump to create a flow of water out of
clean water hose. (It may take several pumps to prime the pump and create a
pressured flow.)
For best performance, keep the pump side up at a 45-degree angle (as shown in picture).
The end of the intake water hose (attached to the pump and connected to the pre-filter) must be held underwater for proper performance.
Water that has passed through the system is ready to drink!
Filter care instructions:
Unused filters have an indefinite shelf life. Filters do not require cleaning or regular maintenance. Diminished water
flow is a sign that the filter is clogged and needing to be flushed or replaced.
DO NOT put in the freezer.
DO NOT use it with hot water.
DO NOT use it with saltwater.
DO NOT use it with anything but water.
DO NOT put in the dishwasher.
Dimensions When Packed in Carrying Case: 7 x 5 x 3.5 Inches
Weight: 0.85 Pounds
Filter Pore Size: 0.2 Micron
Filter Capacity: Up to 100 Gallons
Color: | Blue, Purple, White |
Size: | 20, 24 |
Material: | 100% Polyester |