コレクション: Filter Replacements - VARIOUS


*IMPORTANT INSTRUCTIONS BEFORE USE: Each Filter MUST be flushed before use with the red flushing bulb.  Simply screw the red flushing bulb onto the filter and hold under faucet then slowly turn on faucet until water starts to flush through the filter for a at least 3 minutes.  Flush the filters in order to get any loose carbon dust rinsed off.  This also activates the filters.  You should also keep the flushing bulb for future use, if the flow rate slows way down, you can try flushing the filters again to speed up the flow rate.  If this does not help then it is most likely time to replace the filters.

HOW OUR FILTERS WORK

The high-tech, porous, BPA-free, micro-filter is infused with both the finest-granulated activated coconut carbon exclusive adsorbing media. Our manufacturer, Seychelle Environmental Technologies created a uniform 2-micron absolute pore size for the assured reduction and removal of all five areas of contamination. Removal of contaminants with carbon is a surface phenomenon known as adsorption, resulting from the molecular attraction of substances to the surface of the carbon. The controlled 2-micron filter contains thousands of interconnected omni-directional pores that result in a "tortuous path" for superior analyte reduction. By forcing the source water through the filter, contaminants and pollutants are removed, while beneficial trace minerals remain.  Seychelle's exclusive Ionic Adsorption Micro-Filtration coordinates all processes of contaminant reduction by adsorption, absorption, chemical bonding, chelation, and depth filtration. Each product is designed to guarantee the greatest amount of reduction per contaminant. 

Filtration Benefits:

Aesthetic – unpleasant taste and odors, cloudiness, silt, sediment, chlorine, and chlorine byproducts.

Biological – harmful microscopic pathogens, including cryptosporidium, giardia, e-coli, and other cysts and spores.

Chemicals – toxic chemicals (VOCs), trihalomethanes, PCBs, PCEs, detergents, and pesticides.

Dissolved Solids – heavy metals including aluminum, fluoride, cadmium, chromium 6, copper, lead, arsenic, and mercury

Radiological – gross beta, radon 222, alpha radium 226, uranium, plutonium, cesium 134 and cesium 137.

QUESTIONS & ANSWERS

  • I have the two-filter model, and the filters are extremely slow sometimes, what is the problem?

  • Answer: The filters need to be flushed properly. If it doesn't fit well try using an outside spigot to flush them.  You will need to have good water pressure in order to flush the filters well.  The media inside the filters need to be completely flushed for at least 2 - 3 minutes before they will work correctly. Sometimes it takes a few times flushing and using to get them flowing correctly.   You may have to flush them periodically sometimes but not all the time then you will notice the ease of flow. 

  • What is the Filtering Capacity:  200 gallons

  • How often do filters need replacing on average?  

    They need to be replaced every 4 to 6 months depending on daily use and quality of water that is being filtered continuously. Please join our subscription option. 

  • Does this filter remove the sodium? 

  • No, they do not remove sodium.  PLEASE DO NOT USE IN SALT WATER OR OCEAN WATER